Gxt Ferret 927 High Amps Probe Manuel d'utilisateur télécharger pdf

OPERATOR’S MANUAL

High Amps Probe 927

To Measure Low Amps with a DMM

1. Connect the High Amps Probe to the interface module.

2. Connect the interface module to the multimeter’s

banana jacks.

3. Select the millivolts range.

4. Close the Jaws on the High Amps Probe and zero the

reading on the DMM by adjusting the zero knob on

the interface module.

5. Clamp the High Amps Probe around the circuit you

want to test. 1 Millivolt equals 1 Amp. A reading on

the Multimeter of 125.1 Millivolts means you are

measuring 125.1 Amps.

To View Waveforms on a Lab Scope

1. Connect the High Amps Probe to the interface module.

2. Connect the interface module to one of the LabScope’s

Channels. Use the BNC or Banana Adapter as

needed.

3. Select a volts per division and a time base that will

allow you to see the waveform of the circuit under test.

4. Make sure the jaws are closed on the Amps Probe

and zero the trace on the LabScope by adjusting the

zero knob on the interface module.

5. Clamp the High Amps Probe around the circuit you

want to test and view the waveform.

Other Instructions

The interface module has two power options. The first time

you press the power button the LED will flash indicating

the unit will stay on until the battery is dead.

The second time you press the power button, the LED will

stay on indicating the unit will automatically power down in

5 minutes.

The third time you press the power button the unit will turn

off.

Technical Support

For additional information or technical assistance, please

contact Ferret Instruments at (800) 627-5655 or

www.ferretinstruments.com.

FEATURES

High Amps Probe measures

from 1 Amp to 600 Amps AC

or DC.

Connects to any Digital

Multimeter w/Banana Jacks

and a millivolt scale.

Connects to any Graphing

Multimeter or Labscope w/

Banana Jacks or BNC

connectors.

3 Year Limited Warranty

www.ferretinstruments.com

1 2

High Amps Probe 927 1

Résumé du contenu

Page 1 - High Amps Probe 927

OPERATOR’S MANUALHigh Amps Probe 927To Measure Low Amps with a DMM1. Connect the High Amps Probe to the interface module.2. Connect the interface mod

Page 2

FERRET INSTRUMENTS LIMITED PRODUCT WARRANTYFERRET INSTRUMENTS, INC. of Cheboygan Michigan, warrants to the original purchaser that any products manufa

Commentaires sur ces manuels

Pas de commentaire

Gxt Ferret 927 High Amps Probe Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Gxt Ferret 927 High Amps Probe. GxT Ferret 927 High Amps Probe User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Gxt Ferret 927 High Amps Probe