Gxt Ferret 925 Amp Probe Manuel d'utilisateur télécharger pdf (Page 4)

SAFETY PRECAUTIONS

E925-01

—Read All Instructions Before Using The Probe—

Never use the Probe on circuits with voltages higher than 600V rms.

Keep your fingers behind the hand guard.

Be extremely cautious when clamping around uninsulated conductors or

bus bars. Accidental contact with the conductor could result in electric

shock.

Never use a Probe whose insulating protection has been impaired.

Always wear eye protection when testing vehicles. Be extra careful near

batteries and moving parts. Do not lay tools on a battery.

Battery gas is highly explosive.

If a battery explodes flush the acid away from skin with generous amounts

of water. Follow up with a neutralizing solution of baking soda and then

more water.

Never use a wrench on the ungrounded battery terminal until the

grounded one has been disconnected. Contact between the vehicle

body metal and the hot terminal can cause sparks to ignite gas or even

weld tools into a battery short circuit.

Keep the space around a battery well ventilated.

Do not make sparks or allow flames near batteries.

Before working on a vehicle set the brakes and block the wheels. Beware

of automatic parking brake releases.

Keep your work area well ventilated and free of exhaust.

Avoid electrical shocks caused by getting close to live ignition wires or

touching the coil TACH terminal. A person's reaction near a live engine

can be more damaging than the shock.

Keep spark producing devices at least 0.5m (18") above the floor to

reduce the hazard of igniting gasoline vapor.

Do not let test leads wind up in a moving fan or pulley. Route leads away.

Remove finger rings and metal wrist bands. They can short terminals

and become very hot from electric current.

1 2 3 4

Pas de commentaire

Gxt Ferret 925 Amp Probe Manuel d'utilisateur Page 4