Gxt V082-01, Ferret Advance Timing Light Manuel d'utilisateur Page 2

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 1
FERRET BRAND LIMITED PRODUCT WARRANTY
GxT, Inc. of Cheboygan Michigan, warrants to the original purchaser that FERRET brand products are
free from defects in materials and workmanship for a period of two years from date of purchase. Our sole
obligation for a product within the above warranties will be to repair or replace, at our option, any defective
parts and return the product to the sender within the U.S.A., shipping prepaid, if it is sent to our Repair
Department shipping prepaid and accompanied by proof of purchase.
This Warranty does not apply to products which have been altered outside the factory; or repaired by any-
one other than the factory or its authorized service centers; or which have been damaged from accidents,
negligence, or abuse; or have been used differently than described in the printed instructions. Please note
that wear and tear on leads and replacement of consumable items such as: NOx Sensors, Oxygen Sen-
sors, and paper, is not covered by warranty.
GxT Inc.ʼs sole liability and buyerʼs exclusive remedy is limited to repair or replacement of the product
as stated in the Limited Product Warranty. THERE ARE NO OTHER WARRANTIES EXPRESSED OR
IMPLIED INCLUDING THOSE OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
AND GxT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
FROM THE SALE OR USE OF THE PRODUCT.
Some states do not allow limitations on the length of implied warranties nor exclusion or limitations of in-
cidental or consequential damages, so that the above limitations and/or exclusion may not apply to you.
This warranty gives you specifi c legal rights and you may also have other rights which may vary from state
to state.
SAFETY PRECAUTIONS
Do not look into the light beam. Internal eye burns may be the result. The pain usually starts in a day or two.
Do not touch rotating engine parts that appear stopped or slowed under the strobe light fl ashes.
Always wear an eye shield when testing vehicles. Be extra careful near batteries and moving parts.
Battery gas is highly explosive.
a. If a battery explodes, fl ush the acid away from person's skin with generous amounts of water. Follow up
with a neutralizing solution of baking soda and then more water. Med i cal treatment for acid burns may be
necessary.
Treat clothing, vehicle parts, and equipment similarly. Any acid traces inside equipment must be re moved
by generous rinsing. Dry off equipment afterwards and place in a warm 50° C
(120° F) oven until thoroughly dry.
b. Never use a wrench on the ungrounded battery terminal until the grounded one has been dis con nect ed.
Contact between the vehicle body metal and the "hot" terminal can cause sparks to ignite gas or even
weld tools into a battery short circuit.
c. Keep the space around a battery well ventilated.
d. Do not make sparks or allow fl ames near batteries.
Before working on a vehicle, set the brakes and block the wheels. Beware of au to mat ic parking brake re-
leas es.
Keep your work area well ventilated and free of exhaust. Engine exhaust contains deadly poisons.
Avoid electrical shocks caused by getting too close to live ignition wires or touching the coil TACH ter mi nal. A
person's reaction near a running engine can be more damaging than the shock.
Keep spark producing devices at least 0.5m (18") above the fl oor to reduce the hazard of igniting gasoline
vapor.
Do not let test leads wind up in a fan or pulley. Route leads away.
Remove fi nger rings and metal wristbands. They can short terminals and become very hot from electric cur-
rent.
Ferret 82S
Advance Tim ing Light
Vue de la page 1
1 2

Commentaires sur ces manuels

Pas de commentaire