Gxt V016-01, Ferret 16 GasLink II 5-Gas Analyzer Manuel d'utilisateur télécharger pdf (Page 15)

The analyzer will zero the gas bench then ask you to turn on the

gas valve on and adjust the pressure regulator until the bar graph

is between the two arrows.

The analyzer will display a 60 second count down message. If the

calibration was successful you will see the following screen.

If you experience an error in performing a Gas Calibration, please

retry the procedure again. If you still have trouble, contract customer

service at (800) 627-5655 for additional help.

Printing

The GasLink II supports printing to a custom thermal printer. Con-

nections for power and data are made through the RJ-45 connector

found on the back of the analyzer. Simply plug in the printer and

press the PRINT button on the front panel.

Internal Batteries

The GasLink II has three AA batteries that maintain the clock. If

the batteries need to be replaced, remove the back panel of the

analyzer to gain access. The date and time can be set by accessing

the Date and Time functions found in the analyzer setup.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Pas de commentaire

Gxt V016-01, Ferret 16 GasLink II 5-Gas Analyzer Manuel d'utilisateur Page 15