Gxt Ferret 94 Mulitmeter Manuel d'utilisateur télécharger pdf (Page 8)

SAFETY PRECAUTIONS

E094-01

—Read All Instructions Before Using The Probe—

Exceeding the limits of this meter is Dangerous. It will expose you to

serious or possible fatal injury. Carefully read and understand the cautions

and the speciﬁcations limits of this meter.

Do not try to measure any voltage that exceeds 1000V DC or 750V AC RMS.

Voltages above 60V DC or 25V AC RMS may constitute a serious shock

hazard.

Circuit tested must be protected by a 15A fuse or circuit breaker.

Do not attempt to use this Meter if either the Meter or the test leads have been

damaged.

Use a current clamp to measure circuits exceeding 10A.

Avoid electrical shock: do not touch the test leads, tips or the circuit being

tested.

Select the proper function and range for the measurement. Do not try voltage

or current measurements that may exceed the ratings marked on the input limit

for switch or terminal.

Never connect more than one set of test leads to the Meter.

Disconnect the live test lead before disconnecting the common test lead.

Battery gas is highly explosive. If a battery explodes ﬂush the acid away from

skin with generous amounts of water. Follow up with a neutralizing solution of

baking soda and then more water.

Never use a wrench on the ungrounded battery terminal until the grounded

one has been disconnected. Contact between the vehicle body metal and the

hot terminal can cause sparks to ignite gas or even weld tools into a battery

short circuit.

Keep the space around a battery well ventilated. Do not make sparks or allow

ﬂames near batteries.

Before working on a vehicle set the brakes and block the wheels. Beware of

automatic parking brake releases.

1 2 3 4 5 6 7 8

Pas de commentaire

Gxt Ferret 94 Mulitmeter Manuel d'utilisateur Page 8